LG LMV1765 Serie Manuel De L'utilisateur page 36

Problem
Microwave oven
Installation issue
- Vibration noise
- Unit is not level
- Installation damage
Spark / Arcing
Unit has no power
Vent is not working
- Weak or no ventilation
- A bnormal noise during
operation
- Product overheating
All costs and expenses associated with the above excluded circumstances, listed under the heading, This
Limited Warranty Does Not Cover, shall be borne by the consumer.
TO OBTAIN WARRANTY SERVICE AND ADDITIONAL INFORMATION, PLEASE CALL OR VISIT OUR WEBSITE:
Call 1-888-542-2623 (7 A.M. to 12 A.M., 365 days a year) and select the appropriate option from the menu, or visit our
website at http://www.lg.com
Cause
Space More Than Wall Thickness
Mounting
Toggle Wings1
Plate
Toggle Bolt
Wall
3. Product carried/installed improperly
Aluminum foil or metal utensil used in
microwave mode
1. House power turned off (power supply)
2. Tripped breaker
3. The power cord is not installed properly
1. Improper blower unit direction or installation 1. C heck blower unit direction and
2. Improper ductwork or damper connection
Exhaust Adapter
Slide exhaust
adapter into
guides on
rear panel.
Bolt
End
Damper
(hinge side up)
Locking
Tabs
Guides
- 36 -
Solution
DO NOT use aluminum foil or
metal utensils in microwave mode
- Check user instructions
1. Check house power supply
2. C heck proper power cord
connection
3. Check extension cord
reinstall if necessary.
2. P roperly align the exhaust
ports and blower plate opening.
3. Blower unit exhaust ports
should be completely exposed
to the outside
4. A fter installation, check the air
ventilation path