Seating Your Wave ® Music System On The Multi-Cd Changer; Selecting A Location For Your System - Bose Wave Notice D'utilisation

Masquer les pouces Voir aussi pour Wave:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Setup

Selecting a location for your system

Seating your Wave
6
Your Multi-CD Changer is designed to fit directly under your Wave
connect the Multi-CD Changer to the Wave
complete system using the following guidelines.
• Place the system on a table or other flat surface.
• To enjoy maximum performance, place the system across the room from where you will be
listening.
• Place the system within two feet of a wall, and avoid placing it directly in a corner.
CAUTION: DO NOT place your system on a heat-sensitive surface. Like all electrical equipment,
it generates some heat.
CAUTION: DO NOT use your system in a damp location or any other place where moisture can
get inside.
Note: DO NOT place your system on a metal surface. It could interfere with AM reception.
®
music system on the Multi-CD Changer
With the changer placed in your chosen location, carefully set your Wave
top of the changer.
• Make sure the rear feet of the Wave
changer.
®
• Make sure the Wave
music system sits flat and the side edges of both units are aligned.
®
music system, select a good location for the
®
music system fit into the recesses on top of the
®
music system. Before you
®
music system on

Publicité

Table des Matières
loading

Table des Matières