Description; System Description; Display Range - Baumer PA200 Guide Utilisateur

PA200
Linear increase: Display scaling defines interaction of input signal and displayed
Displayed
value 2
Displayed
value 1
Measured Measured
value 1 value 2
Linear decrease: There are two options to enter the value coordinates: Either by
Displayed
value 1
Displayed
value 2
Measured Measured
value 1 value 2
14

2 Description

2.1 System description

The process display is intended as indicator for measured values in
industrial applications.
- Voltage input ±10 V, ±20 VDC, ±200 VDC
- Voltage input ±100 mVDC for current measurement by external
resistor Shunt (measuring resistor)
- Current input ±20 mA
- Optionally linearized display
- LED display, 4 digits, programmable
- DIN housing 48 x 24 mm

2.2 Display range

value. Linear behavior requires defining two measured values
- (inP) respectively displayed values (dSP). Both limits should be at
the end of the display area to ensure maximum precision.
keypad (in SCAL mode) or using the teach-in feature (teach mode).
Assigning the displayed values requires manual entry (with device
still in teach mode). Scaling is enabled at standard signal ±10 V, ±20
mA and shunt.
Display
4 digits
Sticker to indicate measuring unit
www.baumer.com