Arcus BLANCONE Mode D'emploi page 9

4. Attach the straight arm. Tighten the stop/
safety screw with a 3 mm Allen key (included
in the package). Make sure that the straight
arm can be moved up and down for precise
positioning.
5. Altering the force required to move the
straight arm up and down is done by adjust-
ing the screw (located on the back of the
central position locking mechanism) with a
5 mm Allen key (included in the package).
6. Mount the bleaching head by turning clock-
wise the positioning fixator located on the
telescopic arm. By turning the conical fixator
located on the straight arm, the telescopic
arm is firmly fixed.
7. Connect the cable from the top of the angu-
lar arm to the one coming from the bleach-
ing head using the connectors (see figure).
Note: the device will not work if the cable
connectors are incorrectly coupled.
8. Connect the cable on the bottom of the an-
gular are with the power adapter using the
connectors (see figure). Note: the device will
not work if the cable connectors are incor-
rectly coupled.
A
O
9. Plug the power cord into the power network,
E
SHUKO socket.
O
CLICK
ARCUS
LIPS
ARCUS
DUETTO
CARE
LED Bleaching Lamp - FIXED
GB
9