Preparation For Work With Patients; Positions Of Bleaching Head - Arcus BLANCONE Mode D'emploi

GB
VIII. PREPARATION FOR WORK WITH PATIENTS
1.
Before starting work with the bleaching device, insulate the patient's
non-calcified soft tissue, place a cover or protective napkin on the
face, apply protective UV cream and put on protective glasses.
Bleaching gel is applied to the teeth surface according to the direc-
tions for use outlined by the gel manufacturer.
The patient should be under constant supervision by the dentist dur-
ing the bleaching process in order to avoid discomfort and to ensure
all safety and technological procedures are applied.
2.
It is desirable to check the individual sensitivity of the patient. The device has two levels of intensity
(high HI and low LO) and the optimal conditions are selected by adjusting the distance of the
device to the patient's teeth.
Testing starts with a high intensity "Hi" and a distance of 5 cm and if the heat sensation is very
strong, the distance is increased to achieve an acceptable thermal sensation.
If the acceptable distance is more than 10 cm, it is better to switch to a mode with low intensity -
"Lo" (Low) and put the bleaching head closer to the teeth to obtain optimal distance.
IX. POSITIONS OF BLEACHING HEAD AGAINST PATIENT'S TEETH
CORRECT
12
LED Bleaching Lamp - FIXED
5-15 cm distance
INCORRECT
TOUCH
STICK
HOME
DAY
CARE
ULTRA
DUETTO
HOME
NIGHT
DUETTO
ACTIVE
CLICK
ARCUS
LIPS
ARCUS
DUETTO
CARE