Preparation For Operation - Arcus BLANCONE Mode D'emploi

Lampe de blanchiment dentaire à led fixed
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 49
GB
VI. PREPARATION FOR OPERATION
1.
The BLANCONE
the patient and the dental unit. See the positioning examples (Section IX).
The bleaching head must be in the same vertical plane and parallel with the arc of the
teeth with a distance between 5-15 cm. See the positioning examples (Section IX).
2.
Plug the power adapter into the power network. Only one point/dot on the
display lights up. Press START / STOP button and then the "Hi" (High) or "Lo"
(Low) intensity indication appears.
3.
The display shows "HI" - a high intensity level. If you want to switch to the "Lo"
(Low) intensity mode, press the TIMER / MODE (+ / -) button once. Then the
display will show "Lo". Every time before setting the required time, you will be
able to select the Hi or Lo intensity level.
4.
Press the START / STOP button once again and set time option will be dis-
played. Note that the device will save the timeframe used in the latest
bleaching procedure. Required time frame for operation is set by pressing
TIMER + (increasing time) and TIMER- (reducing time):
The display on the bleaching head will indicate timeframes between 10 sec.
and 9 min. and 50 sec. with a dot between the two digits.
Examples:
Display indicates: 13. This means the timeframe is set to 13 min.
Display indicates: 0.1. This means the timeframe is set to 10 sec.
Display indicates: 9.5. This means the timeframe is set to 9 min. and 50 sec.
The display on the bleaching head will indicate timeframes between 10 min. and 30 min.
without a dot between the two digits.
5.
Press the START / STOP button one final time and the
device will start to emit light. A flashing dot on the dis-
play will indicate that the device is working properly.
6.
If either of the TIMER / MODE (+ / -) buttons is pressed
during operation, the unit switches to Pause mode. A
blinking display with the remaining time will indicate
that the device is paused. Operation is resumed by
pressing any TIMER / MODE (+ / -) button again.
10
LED Bleaching Lamp - FIXED
ARCUS+ bleaching device should be placed in a suitable position around
®
TOUCH
STICK
HOME
DAY
CARE
ARCUS
LED Bleaching Unit
ON/OFF
ULTRA
TIME
MODE
DUETTO
HOME
NIGHT
DUETTO
ARCUS
ACTIVE
CLICK
ARCUS
LIPS
ARCUS
DUETTO
CARE

Publicité

Table des Matières
loading

Table des Matières