Honeywell FocusPRO TH6320WF Serie Guide De L'utilisateur page 12

Connecting to your Wi-Fi network
3 Make sure your thermostat is connected.
While the connection is in process, your
thermostat will flash Wait for up to 3 minutes.
When the connection is complete, the display will
show Wi-Fi Setup Connection Success. The Wi-Fi
signal strength will appear in the top-right corner.
After about 60 seconds, the home screen will
appear and Register at Total Connect will flash until
registration is complete.
To register online for remote access to your
thermostat continue on page 11.
If the thermostat displays Connection Failure or continues to display Wi-Fi Setup,
Note:
confirm you correctly entered your home network password in step 2.
69-2736EFS—05
10
M33875
M33876