E - Using The Product On A Smartphone - THOMSON 512392 Manuel D'utilisation

E - uSiNg ThE prOduCT ON A SMArTphONE

The free application used to control, configure and
view the cameras remotely on your smartphone
is available from the Appstore and Google Play.
Download, install and run the 'ThomView' app.
Although we have described how the Android app
works here, the same applies to the iPhone.
• Run the application on your smartphone or
tablet, then click on the
the icon.
This will activate the phone's camera so that
you can scan in the QRCode.
• Next, enter the name you want to give
your camera (Device Name), its user name
(Username) and its password (Password). The
default username is "admin" and there is no
pre-set password.
• Click on OK to confirm, then click on the name
of your camera. Next, click on the
icon to display your camera feed.
Note: there is a setting in the application that lets
you enable connections to the camera only when
the smartphone or tablet is connected via WiFi and
not over the mobile data network.
12
en
Motorised 720P Hd WiFi iP caMera
icon. Next, click on
Video
Tick or untick 'Only connect in Wi-Fi network' as
required using the More icon under 'Settings'.
Many of the configuration options can be accessed
by clicking on your camera video feed:
2
3
4
5
6
8
7
1 If several cameras have been registered
to the app, simultaneous viewing is possible
2
General camera configuration: WiFi,
username and password, night vision, etc.
3 If night vision is not set to auto, lets you
switch the camera's infrared lights on or off
4 Remote enabling or disabling of the camera's
motion detection (what the camera triggers
when motion is detected depends on how it
is configured, e.g. to send an email alert)
5 Enable the camera microphone
6 Activate the camera loudspeaker
7 List of cameras recognised by the app
8 Display live video feed of selected camera
9 Access to predefined rounds
10 Display motor controls (you can also slide
your finger across the screen to change the
camera angle)
11 Access to predefined positions
12
Snapshots and videos saved on the phone
13
Take snapshot (saved on the phone)
14 Event and alert log
15 Start/stop video (saved on the phone)
16 Smartphone app options
1
9
10
11
13
15
14
16
12