D - Configuration; Access To Camera Configuration; Access To All The Settings; Live Video - THOMSON 512392 Manuel D'utilisation

Masquer les pouces Voir aussi pour 512392:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Motorised 720P Hd WiFi iP caMera

1 - ACCESS TO CAMERA CONFIGURATION

• Insert the installation CD provided into a reader
and run the IP Camera Search Tool program:
This will detect your camera on the network and
show its IP address.
• Double-click on its name to open the camera
configuration in your web browser.
• Your browser will need an additional module to
display the image from your camera correctly
and will ask you if you want to install it. Accept
the request to allow your browser to display the
image:
Note: Depending on which browser you are using,
the procedure may differ but the principle remains
the same: you must permanently allow the module
to run if you want your camera to work properly in
your browser.
• Select the display language, then enter the
username and password for connecting to
your camera. The default username is admin
and the password is left blank, so you should
leave the field empty. At the first connection,
the camera will immediately ask you to replace
the default username and password to improve
security:

d - CONFigurATiON

When you have finished changing the username and
password, you will be asked to log back in.

2 - ACCESS TO ALL THE SETTINGS

2.1 - live video

Once you have logged in with your new username
and password, the camera feed will be displayed:
6
3
4 5 7 8
9
10
1 If you are using a microSD card (not included)
inserted into the camera to store images or
snapshots, you can access these here
2 Access to camera configuration tab
3 Anti-flicker: If the image lighting is artificial,
select 50Hz. If the light source is natural,
select outdoor.
4 Quick quality and frame rate selection
5 Horizontal image inversion
6 Vertical image inversion
7 Camera motor control
8 Contrast, brightness, colour and night vision
infrared illumination settings
9
Activate computer microphone if present: lets
you speak through the camera's loudspeaker
10 Activate the camera microphone: used for
listening to sounds picked up by the camera
11 Take a snapshot of the camera image
on your computer
2
1
11
12
9
13
en

Publicité

Table des Matières
loading

Table des Matières