Introduction - Nostalgia Kegorator KRS6000 Serie Manuel D'instruction

INTRODUCTION

To ensure that your KEGORATOR™ works to the maximum efficiency for which it was
designed, keep it in a location where there is proper air circulation and electrical outlets.
Choose a location where the KEGORATOR™ will be away from
heat and will not be exposed to direct sunlight.
The KEGORATOR™ is designed for indoor use only. It should not be used outdoors.
•
• The KEGORATOR™ is designed to be freestanding and should
not be placed in a built-in or recessed area.
• The KEGORATOR™ comes with a 2.5 lb. CO 2 bottle, which should
be able to dispense four 15 gallon kegs of beer.
• KEGORATOR™ capacity: 6.1 cu. ft.
• KEGORATOR™ unit dimensions: L 21.30" x W 26.60" x H 33.20"
• The following dimensions are recommended for clearances around the KEGORATOR™:
Sides ........................ ¾" (19 mm)
Back ......................... 1" (25 mm)
• KEGORATOR™ unit weight: 75.6 lbs
Compatible Keg Types
The KEGORATOR™ can hold one Full Size Keg, or one Pony Keg, or
two 5-Gallon Kegs. DOES NOT fit non-standard keg sizes.
NOTE: Keg Coupler fits D-Sankey Keg Valves. Attaching
the Keg Coupler will add height to the Keg.
¼ Barrel Pony Size
(7-8 Gallons)
5
5 Gallon D System
½ Barrel Full Size
(14-16 Gallons)