Decal Instruction - FMS F-16C Manuel D'utilisation

E
N

Decal Instruction

Please choose one set of the decals according to your taste or history materials and paste it as shown （ for reference only).
Water Decal Instructions:
The above are water decals. Do not force them off from the backing paper. Please operate according
to the following steps:
1.Make sure your hands are dry, and cut the decal down with scissors carefully.
2.Put the decal in water for 2 mins to bring it to full absorption.
3.Carefully remove the decal from the backing paper and apply it on the corresponding position of the airframe (it would be
helpful to wet the corresponding position of the airframe to adjust the decal)
4.Soak up the excess water with tissue, squeeze out air slowly, and wait for drying.
Note:
Remove the thin film (over the decals)24 hours later.
12