KIRAMI Comfort Family Mode D'emploi page 40

Masquer les pouces Voir aussi pour Comfort Family:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Replacing the magnesium rod
NB! Before heating up check that the thread is waterproof. If
water is leaking through the thread then fasten it more and check
that o-ring is in place.
40/76
1. Unfasten
thread of the rod.
2. Take out the
old rod and
replace it with a
new magnesium
rod.
3. Insert the new
rod.
4. Fasten the
thread, you will
need to use pliers
to make it
waterproof.

Publicité

Table des Matières
loading

Table des Matières