Commissioning; Preparation - Stiebel Eltron DHE Connect 18 Utilisation Et Installation

INSTALLATION

Commissioning

12. Commissioning

12.1 Preparation

Internal anti-scalding protection via jumper slot
Jumper position Description
43 For example in nurseries, hospitals, etc.
50
55 Max. for shower operation
60 Factory setting
No jumper Limited to 43 °C
f Install the jumper in the required position (= temperature in f
°C) on the "Tmax" pin strip.
www.stiebel-eltron.com
43°
50°
55°
60°
CAUTION Burns
If operating with preheated water, e.g. if using a solar
thermal system, the internal anti-scalding protection and
the temperature limit, which can be set by the user, may
be exceeded.
f In this case, limit the temperature with an upstream f
central thermostatic valve (e.g. ZTA 3/4).
DHE Connect | DHE Touch | 99