Electromagnetic Fields (Emf); Preparing For Use - Philips Double Contour HP6368 Mode D'emploi

EnglisH
8

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.

Preparing for use

Charging
It takes approximately 10 hours to charge the batteries fully. When the
batteries are fully charged, the appliance has a cordless shaving time of up
to 40 minutes.
Always switch off the appliance before you connect it to the mains.
1 Insert the appliance plug into the appliance (1). Plug the adapter
into a wall socket (2) (Fig. 3).
The charging light on the adapter goes on.
,
Note: The charging light on the adapter remains on after the appliance is
fully charged.
Note: Do not leave the adapter plugged in for longer than 14 hours, as this
may affect the lifetime of the batteries.
rechargeable batteries low or empty (HP6368 only)
- If the batteries run low during use, the battery low light lights up. You
can continue to shave for a few minutes. (Fig. 4)
- When the batteries are empty, the battery-low light goes out and the
appliance stops. Charge the batteries immediately.
- When you switch off the appliance while the batteries are low, the
battery-low light flashes 4 times.
attaching/detaching the shaving head
1 To attach the shaving head, slide it into the guiding grooves on both
sides of the opening in the handle. Then press the shaving head
onto the appliance ('click') (Fig. 5).