Black & Decker BXEFT48E Mode D'emploi page 6

ENGLISH (Original instructions)
Use and care:
♦ Fully extend the appliance's power cable before each use.
♦ Do not use the appliance if the on/off switch does not
work.
♦ Do not remove the support feet of the appliance.
♦ Do not move the appliance while in use.
♦ Use the appliance handle/s, to catch it or move it.
♦ Do not use the appliance if it is tipped up and do not turn
it over.
♦ Do not turn the appliance over while it is in use or
connected to the mains.
♦ Disconnect the appliance from the mains when not in
use and before undertaking any cleaning task.
♦ Store this appliance out of reach of children and/or
persons with physical, sensory or reduced mental or lack
of experience and knowledge.
♦ Keep the appliance in a dry, dust-free place, out of direct
sunlight.
♦ Make sure that dust, dirt or other foreign objects do not
block the fan grill on the appliance.
♦ Do not use the appliance to dry pets or animals.
♦ Do not use the appliance to dry textiles of any kind.
Service:
♦ Make sure that the appliance is serviced only by special-
ist personnel, and that only original spare parts or acces-
sories are used to replace existing parts/accessories.
♦ Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability
null and void.
DESCRIPTION
Main Panel
1 On / Off Button
2 Fan Speed
3 Mode Function
4 Oscillation
5 Timer
Display
A Fan Speed
B Normal Mode
C Natural Mode
D Sleep Mode
E Oscillation
F Display (Timer / Temperature
6
INSTALLATION
♦ Be sure to remove all packaging material from inside the
appliance.
♦ Ensure that the fan is switched off from the supply mains
before start any installation or assembly operation.
♦ Do not remove the support feet of the appliance.
♦ Ensure that the appliance is level with respect to the floor.
♦ Do not cover or obstruct any of the openings of the
appliance.
♦ Do not cover or obstruct the sides of the appliance, leave
a minimum space of 2cm around the appliance.
♦ The plug must be easily accessible so it can be discon-
nected in an emergency.
♦ The appliance should be used with its base fitted.
Assembling the base:
♦ To fix the base into the appliance, place the appliance
face down.
♦ Fit the base on the main body of the appliance.
♦ Fix the base using the screws provided (Fig.1,2,3,4).
♦ Stand the appliance up again so as to check that the
base works properly.
INSTRUCTIONS FOR USE
Before use:
♦ Make sure that all products' packaging has been
removed.
♦ Prepare the appliance according to the function you wish
to use:
Use:
♦ Extend the cable completely before plugging it in.
♦ Attach the appliance to its base making sure that it is
correctly fitted into place.
♦ Connect the appliance to the mains.
♦ LED screen will display the current room temperature.
♦ Guide the appliance to direct the flow of air in the desired
direction.
♦ Turn the appliance on, by using the on/off button.
♦ Select the desired speed.
Mode function:
♦ Press the MODE button (3) to set the fan as Normal (B),
Natural (C) ,or Sleep mode (D) , the mode is displayed
on the LED screen