Remote Control; "Massage" Function Settings - Lanaform Magic Sofa Mode D'emploi

Remote control:

EN
1. Power
2. "Mode" function
3. Function for selecting part of
body to be massaged
4. Vibration intensity settings
5. Massage duration settings
6. Heat function
7. Vibration function
8. Chair position settings
ASSEMBLY INSTRUCTIONS
See diagram on page 2
1) Remove the chair from the cardboard box.
Caution: Please remove the protective packaging and throw it away.
2) Place it on a flat surface.
3) Raise the back and attach it using the attachments provided and check that the metal bars slide easily into the slides in
the chair. See diagram. (Photo 1)
4) Then plug the two cables into the corresponding sockets. (Photo 2)
5) Finally, replace the cover on the back correctly and attach using the Velcro strips. (Photo 3)
INSTRUCTIONS FOR USE
Plug the Magic Sofa into the power supply.
Switch on the Magic Sofa by pressing the ON/OFF button on the remote control ; the remote control display will light up
and the massage chair will go into "standby" mode.

"Massage" function settings

Vibrations
To start the vibrating massage, press «vibration ON». The Magic Sofa will start up in automatic mode for 30 minutes.
The Magic Sofa will stop automatically and go into standby mode once the massage has ended.
Intensity
The Magic Sofa has several vibration levels.
If you wish to adjust the vibration intensity, press the "intensity +" button to increase the intensity by one unit and press
the "intensity –" button to decrease the intensity by one unit.
To stop the vibrations, press the "vibration OFF" button.
4
4
6 1
Heat on/o
2
5
Timer+ Intensity+ Mode
3
Timer- Intensity- Point
7
Vibration Vibration
on o
8
Up Down