Customer Service; Safety Instructions - HellermannTyton SpotClip-Box Manuel D'utilisation

Safety instructions

1.2 Fire protection properties/standards
The product is self extinguishing and its fire protection
properties comply with UL94 V2. The product is tested
according to the filament test (GWT) at 960 °C as well as
standards EN 60598-1 and EN 60598-2-2. The used insulating
materials and damp-proof foils or vapour barriers comply with
DIN EN 13501-1 A2 s1 d0 and DIN 4102-1 A2. Use only
insulating materials and damp-proof foils or vapour barriers of
low flammability, which do not emit smoke in the case of fire
and do not drip.
1.3

Customer service

If you require any information or have any questions for our
customer services, please contact the HellermannTyton branch
in your country. The contact details are listed on the fold-out
page of these operating instructions.
1.4 Information about the operating instructions and
actuality
Please keep these instructions in a safe place.
f Please note:
due to the continuous development of the product, there may be
deviations between the documentation and the product. The
current edition can be found at:
http://www.hellermanntyton.co.uk/site/downloads.
2 Safety instructions
The product was manufactured according to the current state
of technology and the recognised safety regulations.
Nonetheless, improper use of the product can result in hazards
to the life and limb of the user or third parties, or in damage to
the product and other material property.
These operating instructions contain information on safety.
f Always follow all of the instructions to prevent personal injury,
material damage or environmental damage.
4
Operating Instructions • SpotClip-Box • 12-2016