Publicité
Les langues disponibles
Les langues disponibles
Fitting kit
- 1 Ø6 complete insert.
- 1 rubber ring (to avoid piercing the swinging arm).
Assembly
1. On the left hand side, take off the original chain guard.
2. On the right hand side, remove the brake hose fitting bracket.
3. Position the rear fender on the swinging arm, put the screws on left side and the one on
right side then gradually tighten.
4. Mark on the swinging arm the place of the insert for the fitting of the front right of the
rear fender.
5. Remove the rear fender, drill the swinging arm and fix the insert using a specific tool
("Facom or Würth").
6. Reposition the rear fender.
7. Don't forget to harden the rear shock absorber when you ride with a passenger or on a
bumpy road, to avoid damaging the hugger.
* Our hugger and our undertray are compatible.
* Painted and varnished parts are not guaranteed to withstand high pressure washing which can damage them.
* According to the technical data of our paintwork suppliers, we advise waiting one month to obtain a complete polymerization of varnish.
* Accessories fitted on the motorcycle, modified, or damaged through poor assembly or an incompatibility with other parts (tyres, exhaust systems, silencers, etc) will no longer be
considered as new and cannot be returned or exchanged under warranty.
* Tyre Dunlop "D 207" and tyre Michelin "Pilot Power", not being for the given dimensions, are incompatible with under tray and rear fender for tyres of origin in the standard dimensions.
FITTING INSTRUCTIONS
FZS 600 FAZER 1998/2001
ATTENTION
« HUGGER »
Original tyre 160/60 ZR 17.
Publicité
