Publicité
Les langues disponibles
Les langues disponibles
Fitting Kit
- 2 beleved spacers.
Assembly
- Remove both saddles, rear shell, the rear light and the indicators.
- Cut the original undertray like on the photo (well grind down in short the 3 grooves of the number
plate support reinforcement).
- Bring back up the rear shell without tightening it completely.
- Encase our undertray under the shell first to the right, then to the left. Fit it thanks to the original
fixings, and then screw the shell correctly.
- Connect the rear light and the indicators.
- Replace the saddles.
- If necessary, fix the plate with the supplied beleved spacers.
* Painted and varnished parts are not guaranteed against high pressure steam washes or aggressive cleaning products which can damage them and unstuck the varnish. We advise moreover, according to the technical data of our
painting suppliers, to wait one month to obtain a complete polymerization of varnish.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* Any deterioration of the parts due to the presence of any excessive load in the undertray will not be guaranteed.
* A few tyres, faithful to ETRTO standards, may be in fact bigger and higher than dimensions engraved on the tyre (until + 10 mm). They may be not compatible with undertrays and rear huggers which we made with original
tyres and whose dimensions correspond to these ones engraved on tyre.
* Harden the rear shock absorber while drivings with load or on dented roads.
DAYTONA 955 I SWINGING ARM 2001/2005
SPEED TRIPLE 955 I 2002/2004
« CAUTION »
FITTING INSTRUCTIONS
« UNDERTRAY »
Original tyre size 190/55 ZR 17.
Publicité
