Table des Matières
Publicité
2. SAFETY INSTRUCTIONS
-
All persons entering the work area must wear an approved mask specially designed for
protection against harmful / toxic dusts, in addition to using the dust extraction facility,
and keeping work area well ventilated.
-
Children and pregnant women must not enter the work area.
-
Do not eat, drink or smoke in the work area. Any pre1960 building may have paint
containing lead on wood or metal surfaces. If you suspect workpiece contains lead seek
professional advice.
•
Some wood and wood type products especially MDF (Medium Density Fibreboard) can
produce dust that can be hazardous to your health. We recommend the use of an
approved face mask with replaceable lters when using this machine in addition to
using the dust extraction facility.
When using the sander with metal be aware that sparks may ignite the dust in the dust
•
extraction system or vacuum cleaner.
•
This sander is designed for both single-hand and double-hand operations. Adopt a
stable stance and make sure that the mains cable is prevented from coming into contact
with the machine or getting caught up on other objects preventing completion of the
sanding pass.
•
Ensure that you have removed foreign objects such as nails and screws from the
workpiece before commencing sanding.
•
Don't use it for wet sanding, for dry sanding only.
•
Where possible, secure smaller workpieces to prevent it from moving under the sander.
•
Do not force the sander, let the tool do the work at a reasonable speed. Overloading will
occur if too much pressure is applied and the motor slows resulting in ine cient sanding
and possible damage to the sander motor.
•
Do not continue to use worn, torn or heavily clogged sanding paper.
•
Do not touch the moving sanding paper.
•
Always wear hearing protection
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
171
Publicité
Table des Matières
