Set Time & Date - Hortensus RG800 Mode D'emploi

Set Time & Date
• Set Time & Date, screen shows as below:
1) Select "Set time" to set standard time in user's country, press "OK" to confirm, press
to return.
2) Select "Set date" to set date, press "OK" to confirm, press
3) Select "Time format" to set time format as 12 hours or 24 hours, 24 hours will be the
default setting if do not specify. Press "OK" to confirm, and press
4) Use to return to the main menu, start the mower to work.
" "
SETTINGS
• Choose , to select the settings. Press OK. The screen shows the following:
You can choose from "Edge Cut", "Beep", or "Reset".
If you choose "Edge Cut", you can switch the function "ON" or "OFF". The robotic lawnmower
is programmed in such a way that it cuts the edges every five cycles. If you switch the "Edge
Cut" function off, it will execute the function only the first time in any mode.
If you choose "Beep", you can switch the beep "ON" or "OFF" by pressing the buttons on the
display panel.
If you select "Reset", you are asked if you would like to "Reset all data". All data that you have
programmed gets reset and this includes the PIN code. Press OK to reset all the data.
WORK MODE
Choose , in order to set the work mode. Press OK. The screen shows the following:
" " to return.
to return.
" "
" "