Hortensus RG800 Mode D'emploi page 75

Operation
1. OPERATION OF DISPLAY SCREEN
• Put the mower on the fence line in front of the charging station distance within 0.5 meter
and the mower head face to the charging station.
• Press the power button the screen shows "ENTER PIN CODE", input initial password
(0000), then press "OK" to enter the operation interface.
(Navigation in the screen is controlled with the help of the three white buttons below
the screen. The display panel shows the function of the buttons directly above the
respective button.)
• Press "START" to turn on the mower.
• Mower go ahead and extruding poles of the mower touch the paddles of the charging
station , the indicator light on the charging station turns to red, then mower go off the fence
and start to mow.
How it works?
1) The robot mower will cut along the fence line first, two circles: 1st circle on the
fence line, 2nd circle a little inside the fence line.
2) After cutting the edge, the mower will cut inside.
3) After every 5 times charging, the mower will cut along the fence automatically. (If
customer press "HOME", "STOP", power button , it will erase the history counting
and start over).
• Press "MENU" to set function.