Audio Unlimited SPK-4GX Mode D'emploi page 10

Troubleshooting
No sound

Ensure the AC adapter is securely plugged into the wall outlet and the transmitter DC IN jack.

If using batteries to power the transmitter a blinking BLUE light on transmitter indicates drained
batteries. Replace with 4 fresh AA batteries.
Press the "PAIR" button on the transmitter and the „Light/Pair‟ button on the speaker for 5

seconds. There will be an audio test tone when the pairing process is finished. Repeat the
procedure on any additional speakers.

Ensure the speaker POWER button is in the ON position.

Speaker batteries may be too weak. Replace with new batteries or connect with the included
AC adapter.

Ensure the connected audio device is switched on and is producing a signal.

Ensure that the audio device volume level is set 75% of maximum.
Distortion

Speaker batteries may be too weak. Replace with new batteries or connect with the included AC
adapter. Blinking BLUE light on transmitter indicates drained batteries.

Ensure that the audio device volume level is set 75% of maximum.

The speakers are too far from the transmitter. Move closer to the transmitter base.

The audio input signal may be too low or too high. Set the audio source to 75% of maximum.

If using multiple speakers ensure all speakers are placed within the effective operational range.
If any speaker is out of range it will cause distortion on all speakers.