Print Settings - Olympus CAMEDIA C-40ZOOM Manuel De Base

PRINT SETTINGS

Selected images can be reserved in a card for printing on a printer or at a
photo lab that supports the DPOF (Digital Print Order Format) system.
● Print reserve cannot be performed for a picture displayed with
Single-frame print reserve
1
Play back a still picture. Press
2
Press to select PRINT ORDER in the top menu. The PRINT
ñ
ORDER screen appears. Press
then press
3
Select a frame you want to print using single-frame playback or
index display. Press
4
Select an appropriate Print reserve setting (see below) using the arrow
pad.
MORE: Sets the number of prints, date/time and trim size. T Go to Step 5.
SINGLE PRINT: Sets single-frame print and the date. Trimming setting is not
available. T Go to Step 6.
CANCEL: Cancels the Print reserve. T Go to Step 6.
END: Completes the Print reserve. T Go to Step 7.
5
In the screen, set
(trimming). When setting is complete, press
played back.
6
Press to display the top menu again (as in Step 4). Press
select END. The PRINT ORDER screen appears. To perform Print
Reserve for more pictures, repeat steps 3 – 6.
7
Press repeatedly until the PRINT ORDER screen disappears. The
É
top menu appears.
8
Press to exit the top menu. Make sure that the Print Reserve
mark, number of prints and date/time are displayed on the selected
images.
38
.
. The menu appears.
x (number of prints),
to display the top menu.
on the arrow pad to select
Ññ
.
(date/time) and
. A picture is
to
É
,