Environmental Protection; Hazardous Areas; Inspection And Contents Checklist - Mettler Toledo 64060625 Manuel D'installation

1.3.2.

Environmental Protection

1.3.2.1. The battery pack is encapsulated internally and provides IP66 protection from the environment.
1.3.3.

Hazardous Areas

The 64060625 intrinsically safe battery pack is designed to operate within an area classified as
Division 1, Zone 1 or Zone 21. An area is classified as Hazardous because of the combustible or
explosive atmospheres present in those areas. Before installation, check the data plate of the battery
pack to confirm it is marked with the approval for the environment in which it will be used.
1.4.

Inspection and Contents Checklist

Verify the contents and inspect the package immediately upon delivery. If the shipping container is
damaged, check for internal damage and file a freight claim with the carrier if necessary. If the
container is not damaged, remove the battery pack from its protective package, noting how it was
packed, and inspect it for damage.
If re-shipping the battery pack is required, it is best to use the original shipping container. The
battery pack must be packed correctly to ensure its safe transportation.
The 64060627 battery kit packaging should include the following items as shown in Figure 1-1.
The 64060625 battery pack does not include the cable.
•
•
•
•
•
64062816 | 05 | 04/2016
DO NOT INSTALL OR PERFORM ANY SERVICE ON THIS EQUIPMENT BEFORE THE AREA HAS
BEEN SECURED AS NON-HAZARDOUS BY PERSONNEL AUTHORIZED TO DO SO BY THE
RESPONSIBLE PERSON ON SITE.
64060625 battery pack
3 meter (10 ft.) blue cable with connector
Plastic Bag
Installation and Technical manual
Documentation CD
METTLER TOLEDO NiMH Battery Pack Installation/Technical Manual
WARNING
1-3