Emerson KEANE CF320BS00 Mode D'emploi page 14

6. How to Wire Your Ceiling Fan
6.5
Screw the two threaded studs (supplied) into the tapped
holes in the hanger bracket (Figure 22).
6.6
Lift the ceiling cover up to the threaded studs and turn until
studs protrude through the holes in the ceiling cover
(Figure 23).
Secure the ceiling cover in place by sliding lockwashers
over the threaded studs and installing the two knurled
knobs (supplied). (Figure 23).
Tighten the knurled knobs securely until the ceiling cover
fits snugly against the ceiling and the hole in the ceiling
cover is clear of the downrod.
WARNING
!
To avoid possible fire or shock, make sure that the electrical
wires are completely inside the outlet box and not pinched
between the ceiling cover and the ceiling.
THREADED
STUDS (2)
Figure 22
Figure 23
14
(Continued)
CEILING COVER
THREADED
STUDS (2)
LOCKWASHERS (2)
KNURLED
KNOBS (2)
ETL Model No.: CF320