Publicité
Les langues disponibles
Les langues disponibles
HM700AFVALVE
Step 4
Installing new Fill Valve
1. If necessary, reposition valve's metal bracket by
sliding it out. By pulling the solenoid out of the
valve, you may orient the terminals in a more con-
venient direction.
2. Place new Fill Valve into port.
3. Use provided machine screws (replacing those
removed in Step 3) to fasten the valve onto the wall
of the unit.
4. Screw fitting back onto valve.
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
customer.honeywell.com
Step 5
1. Place spring clamp (provided) onto hose.
2. Slide hose onto valve, then slide spring clamp
around valve nozzle. Ensure that the clamp is tight
around the valve to avoid leaks.
3. Reconnect wires to solenoid.
Step 6
1. Restart unit. Observe components and connec-
tions for leaks.
For more information on maintenance and replacement,
please visit http://yourhome.honeywell.com
or call 1-800-468-1502 or 1-800-814-9452
® U.S. Registered Trademark
© 2016 Honeywell International Inc.
33-00158EFS—01
M.S. 03-16
Printed in United States
Publicité
