Reflecta Film Scanner Super 8 Mode D'emploi page 8

Record
1. Move the Film Selection Lever left (8 mm) or right (Super 8) to select
the film type, then press the Enter/Start button.
2. Press Enter/Start to start recording. While recording is in process, a red
dot on the upper left corner will blink.
3. The Film Scanner will stop recording 2 seconds after the user presses the
Enter/Stop button.
4. The file counter at the lower right corner will increase by one after each
recording stop. The number on the counter also represents the file name
of the recorded film.
Note:
Adjustments for Exposure, Sharpness, Frame Adjustment/Movie
Register are available, please make adjustments before recording.
Film Type
Playback
1. Press the Menu button, highlight the Playback
selection, then press Enter.
2. Press the Up/Down arrow button to select the file
to Playback, then press Enter/Start.
3. Press Enter/Stop to pause the playback.
4. Press the Menu button once to the enter Edit
mode. Highlight Return (go back to Playback) or
Delete (delete the current file).
5. Press the Menu button twice to go back to
Record mode or the Main menu.
Exposure0.0
Super8
6
SD
File Counter
00000
EN
0036.MP4