Sharpness; Usb; Frame Adj; Language - Reflecta Film Scanner Super 8 Mode D'emploi

Sharpness

1. Sharpness range is from Low to High. The default
setting is Medium.
2. Press Up/Down to change the value and press Enter
to complete the change selection.
3. Adjust the required Sharpness before recording.

USB

Plug in the included USB cable to upload the recorded MP4 files. The SD/
SDHC memory card is read as an External Drive, called NO_NAME drive
(G:)*. The stored MP4 files are located under the directory of FilmScanner/
MOVIE.
*Note: (G:) may vary from computer to computer.

Frame ADJ

You can make adjustments for the Movie Register (the film centre X and Y).
It needs to be adjusted before recording if the default setting is off.
Film type:
X adjust, Enter
X:
Y:
W:
Adjust the values of X, Y, W by pressing the Up or Down buttons

Language

English, French, Spanish, German and Italian are available on the Film
Scanner.

Format

Highlight Yes or No to erase all files on the inserted SD/SDHC memory card.

Default Setting

Reset all values to 0.0 or medium.
8MM or SP8
Select X or Y or W by pressing the Enter
button
X = shift centre left or right
Y = shift centre up or down
W = zoom-in or zoom-out
8
EN
Low
Medium
High