Chicco POLLY 2 START Notice D'utilisation page 9

EN
ali
INSTRUCTIONS FOR USE
IMPORTANT WARNING
di
so
WARNING! RETAIN FOR FUTURE REFERENCE.
WARNING: BEFORE USE, REMOVE AND DISPOSE OF
ALL PLASTIC BAGS AND PACKAGING MATERIALS
AND KEEP THEM OUT OF REACH OF CHILDREN.
This highchair can be used in three different ways:
• Reclined cradle: from 0 months
• How to use the highchair: from 6 months to 36 months
and 15kg.
• How to use the first seat: from 6 months to 36 months
and 15kg.
COMPONENTS
A. Frame
o-
A1. Front legs
o.
A2. Rear legs
A3. Front wheels (2x)
A4. Tray locking slots
A5. Open/close buttons
B. Seat
B1. Height adjustment buttons
B2. Legrest
B3. Footrest
B4. Legrest adjusting/tilting buttons
B5. Armrests
B6. Armrest tilting buttons
B7. Backrest
B8. Backrest tilting button
B9. Backrest locking pin
B10. Pin slide hole
B11. Adjustable wings
B12. Wing adjustment wheel
B13. Wheel activation button
B14. Child safety harness with 5-point buckle
B15. Lining
B16. Rear cover buttons
B17. Lining button holes
C. Tray
C1. Tray covers
C2. Fastening/adjustment central button
C3. Fastening hooks
TIPS FOR CLEANING AND MAINTENANCE
The cleaning and maintenance of the product must
only be carried out by an adult.
Cleaning
Clean the fabric cover with a soft cloth soaked in water
or a neutral detergent. To remove the fabric cover from
the highchair repeat, in reverse order, the operations
described to fix the fabric cover to the structure. Clean
the plastic parts with a soft cloth soaked in water. Nev-
er use abrasive detergents or solvents. If the highchair
comes into contact with water, dry the metal parts to
prevent the formation of rust.
Maintenance
Keep the highchair in a dry place.
To avoid friction that may compromise the correct func-
tion of the highchair, ensure that all the moving plastic
parts located along the metal frame are free from dust,
dirt or sand.
If necessary, lubricate the moving parts with dry silicone
lubricant.
WARNING: Check that the fabric and stitching are in
good condition each time you wash it.
Outer cover: PVC
Padding: Polyester
FIRST USE/OPENING
WARNING: The product is inserted in the package
wrapped in a protective foil. When removing, make sure
to avoid damage to the product and its additional com-
ponents by cutting objects. Once the product is open,
quickly remove the packaging components and keep
them out of reach of children!
Once using the first time, the backrest needs to be
changed from packaging to use position, making it ro-
tate up until you hear the engagement click (Fig.1).
It is now no longer possible to return the backrest to
packaging position.
WARNING: Check that pin B9 is always engaged cor-
rectly in the sliding hole B10 by pressing lightly on the
back toward the rear part of the highchair.
To open the frame, press simultaneously the A5 open-
ing/closing buttons, distancing the front legs A1 from
the rear legs A2 (Fig. 2) until the click indicates complete
opening.
Insert the footrest B3 in one of the four slots (Fig.3) of
the legrest B2 turning until it locks.
To put the cover on the seat B, after unfastening the
safety harness (Fig. 4), the cover B15 must be fitted from
the top to the bottom until it fits in the backrest part
(Fig. 5).
Put the cover B15 on the seat B, inserting the safety har-
ness B14 in appropriate cover holes. Make sure that the
positions of the holes on the fabric cover correspond to
those on the backrest.
9