Configuring Webshare 141 Wn; Dsl Parameters - Atlantis PROFESSIONAL WebShare 141 WN Mode D'emploi

2. Configuring WebShare 141 WN

2.1 DSL parameters

There are five ways (PPPoE, PPPoA, RFC1483 routed, IPoA, RFC1483 Bridge) for the
device to have a public IP address and then to access Internet. You have to check
with your ISP about which way is adopted.
Gather the information as illustrated in the following table and keep it for reference.
PROTOCOL
PPPoE
PPPoA
RFC1483
Bridged
RFC1483
Routed
Any configuration can be applied without these essential
parameters. Please check them with the ISP before
contact the Atlantis Technical Support (please refer to
Support).
The Atlantis Technical Support cannot provide any
kind of support without the DSL line information.
INFORMATION
VPI and VCI
VC-based / LLC-based multiplexing
Username and Password
Service Name
VPI and VCI
VC-based / LLC-based multiplexing
Username and Password
VPI/VCI
VC-based / LLC-based multiplexing
VPI/VCI
VC-based / LLC-based multiplexing
IP address
Subnet mask
Default Gateway (IP address)
IP address (DNS)
43