Atlantis PROFESSIONAL WebShare 141 WN Mode D'emploi page 39

PORT
Ethernet (1-4)
Power Switch
Power
Reset
Ethernet (1-4)
LINE (RJ11)
Connect an UTP Ethernet cable to one of the four LAN
ports when connecting to a PC or an office/home network
of 10Mbps or 100Mbps.
A Power ON/OFF switch.
Connect the supplied power adapter to this jack.
After the device has turned on, press it to reset the device
or restore to factory default settings. The operation is as
below:

0-3 seconds: reset the device
 3-5 seconds: no action
 10 seconds or above: restore to factory
default settings (this is used when you can not
login to the router, e.g. forgot the password)
Connect an UTP Ethernet cable to one of the four LAN
ports when connecting to a PC or an office/home network
of 10Mbps or 100Mbps.
Connect the supplied RJ-11 cable to this port when
connecting to the ADSL/telephone network.
39
MEANING