Parts And Names - JBL CristalPROFI greenline e402 Mode D'emploi

•
Complete and ready to plug in
The filter is fully ready to plug in and equipped with filter media. The filter media
have been selected to ensure efficient mechanical and biological water purifica-
tion that leaves your aquarium water clear and healthy.
The enclosed accessories guarantee easy connection to almost any freshwater or
marine aquarium

Parts and names

1 Hose connection block with water-stop
1 a Middle lever
2 Pump head
3 Profile seal
4 Combi filter basket II
5 Filter basket
6 Filter canister
7 Water outlet pipe (to the aquarium) with a threaded hose coupling
8 Angle piece (2 x)
9 Extension piece (2 x)
10 Wide jet pipe
11 Spray bar (2 parts)
12 End cap for spray bar (pre-fitted!)
13 Suction cup (5 x)
14 Short hose clip for suction cup (5 x)
15 Long hose clip for suction cup (5 x)
16 Suction pipe (from the aquarium), telescopic, with a threaded hose coupling
17 Intake strainer
18 Hose ( 12/16 for CP e402, e702 and e902, 16/22 for CP e1502, 19/25 for CP e1902)
F1 Pre-filter media: T-profile foam, 15 ppi*
F2 Biological main filter media: JBL MicroMec high-performance biological filter balls
F3 Biological main filter media: Foam pad 25 ppi
F4 Mechanical/biological fine filter media: Foam pad 35 ppi
F5 Available as accessory: mechanical fine filter media: Cotton fleece (2 – 3 layers)
*ppi: pores per inch; 1 inch = 2.54 cm
20
2 a left stopcock lever
4 a Upper part
6 a Locking clips
2 b right stopcock lever
4 b Lower part