Fujitsu LIFEBOOK NH751 Mode D'emploi page 99

2
From the Boot Menu that appears, check whether the <Recovery and Utility> option is present. If it is not
present, it means that the utility must be used from the disc. Proceed to "Running Recovery and Utility from the
Bootable Disc" if <Recovery and Utility> is unavailable.
3
You can also use the SecureCore menu to determine whether the utility is pre-loaded by powering on your
system then pressing the [Enter] key when the Fujitsu logo appears on the screen. The SecureCore Menu will
appear and the Recovery and Utility option will appear in the menu.
Running Recovery and Utility from hard disk
1
Turn on or reboot your system. When the Fujitsu logo appears, press [F12] key.
2
Cursor down to <Recovery and Utility> and press the [Enter] key.
3
While the files are being loaded from the disc, a progress bar will appear at the bottom of the screen.
4
When the System Recovery Options dialog opens, select a new keyboard layout, if necessary, then click [Next].
5
When the Operating System dialog appears, select "Use recovery tools...", then click [Next].
6
If necessary, enter your password, then click [OK].
7
When System Recovery Options window appears, click on Recovery and Utility.
8
The Recovery and Utility screen appears on the screen with three tabs: Diagnostics, Recovery and Utility.
Please note that Diagnostics tab is not supported on certain LifeBook/Stylistic models when running Recovery
and Utility from the hard disk. In order to restore the operating system, please use the middle icon "Restoring
the Factory Image (only C:\drive)" under the Recovery tab.
Running Recovery and Utility from the Bootable disc
To verify/change boot-up priority (rather than booting-up from a hard drive or external floppy drive), perform the following steps:
T
HE BOOTABLE DISC CAN ONLY BE USED WITH THE SYSTEM WITH WHICH IT WAS PURCHASED
1
Power on your system. When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left
mouse or touchpad button; the SecureCore™ Menu will appear.
2
Select the Boot Menu from the SecureCore Menu.
3
Highlight the CD/DVD option.
93 - Restoring Your System Image and Software
.