RECARO C 7000 Instructions D'utilisation page 42

Step 1:
Adjusting the seat height
The seat height can be moved up and down in nine stages
using the switch (3).
Adjust the seat height in such a way that the pedals can
be reached effortlessly and pushed all the way down. At
the same time there must be a guarantee of an optimal
field of vision in all directions, of mirrors, displays, vehicle
fittings and controls.
Your RECARO Comfort-Plus: For getting out of the vehicle, you should move the seat
to the lowest position, using the switch (6) for express down. If you push the switch
upwards again, the seat's memory function automatically moves the seat back to the
previously set height position.
Step 2:
Adjusting the length position
Move your buttocks as close as possible up against the
backrest. By pulling on the U-shaped handle (7), you
unlock the seat tracks and move the seat forward in the
direction of travel or back to the desired position. After
you have released the U-shaped handle, make sure that
both seat tracks audibly click into place.
Choose the distance in such a way that your legs are still
slightly bent when you have pressed the pedals down
fully and that the front edge of the seat is not causing any
unpleasant pressure marks. You should be able to bend
your arms as you place them round the steering wheel.
Your RECARO Comfort-Plus: With the new easy unlocking system (8, optional),
a belt loop on the front edge of the seat cushion, it is easier for you to reach the length
adjustment and are not forced to bend down to the vehicle floor.
42
1
