Philips Senseo HD7873 Mode D'emploi page 10

Fill the water reservoir to the top with cold
3
tap water.
Place the lid on the water reservoir before
4
you put the water reservoir back onto the
machine.
Tilt the water reservoir and place the bottom
5
back onto the machine (1). Then press the top
of the water reservoir towards the machine
(2).
Remove the drip tray.
6
10
Place a bowl with a capacity of at least 2 litres
7
under the coffee spout.
2L
Make sure a pod holder, without pod or pods,
8
is in place.
Put the plug in an earthed wall socket.
9
Press the on/off button 3. The button lights up
10
to indicate that you have to flush the machine.