GreenWorks ELITE LB-390-T Guide D'utilisation page 10

ASSEMBLY INSTRUCTION
W A R N I N G
To prevent accidental starting that could cause serious personal injury, always remove the battery
pack from the tool when assembling parts.
BLOWER TUBE ASSEMBLY (See Figure 2-4.)
• Align either of the grooves on the blower with the tabs on the blower tube. Push the tube into the
blower until the tabs engage the grooves.
• Turn the tube in the direction of the arrow until both of the tabs slide into locked position.
Grooves
Tube
• To install the Front Tube (A) to Rear Tube (B), line the hole on the front tube to the tab on the
rear tube. Once aligned slide the front tube onto the rear tube until the tube is secured.
Tab
FIG.2
A
B
10
Lock Position
FIG.3
FIG.4