THOMSON 512396 Mode D'emploi page 37

Motorised 1080p ip Wi-Fi caMera
Important note: this user name and password is
not the same for your camera. They are specifi c to
the ThomView software and prevent shut-down of
the software by unauthorised persons, for example.
The main software window opens:
1 2 3 4 5 6
12
1 Add a new camera
Software settings
2
Access to videos saved on the computer
3
Access to the operations log in the software
4
Selection of the number of cameras on the
5
screen at one time
Previous page
6
Next Page
Go to full screen
7
Launch a patrol (compatible cameras only)
8
Cut the image display for all of the cameras
9
Date, current time, processor load and hard
10
disk use
List of cameras saved to the software
11
Display frames for camera images
12
Controls available for the selected camera
13
Display of direction and zoom controls
14
(compatible cameras only)
To add your camera, click on the
"Ajouter un périphérique [Add a device]" icon on
the top left:
7 8 9 10 11
13 14
The software can manage
up to 64 cameras: these
arrows let you switch from
cameras 5 to 8 then 9 to
12, etc.
d - CONFigurATiON ANd uSE
1 2 3 4
11 12 13
Camera UID (unique code shown on the
1
camera)
Camera user name (default is "admin")
2
Type of device: select "THOMSON IPC"
3
Name under which the camera will appear in
4
the software (according to your preference)
P2P connection: to be ticked to add a
5
camera using its UID. The UID of each of
the cameras is a unique code of 20 to 24
numbers and letters, shown on the camera
i tself.
Current camera ip address
6
Camera password (none by default, leave
7
blank)
Test button for information entered: enables
8
you to check the connection, user name and
password entered
Current MAC address of the camera
9
Camera connection port (default 88)
10
Information related to the camera that you
11
a re in the process of adding
Button that adds the camera with the
12
information shown at the top of the window
Results of a camera search on the network
13
connected to the computer
Search button: searches for cameras on the
14
network to which the computer is connected
• Carry out the following steps to easily connect
your camera:
• Check the "Connexion
connection]" box.
5 6 7 8 9
P2P
13
10
14
[P2P
en