LRP ZR.30 SPEC.4 PULLSTART Mode D'emploi page 6

USER GUIDE
ZR.30 SPEC.4 PULLSTART
ORDER NO. 32811
Repair procedures / limited warranty
All products from LRP electronic GmbH (hereinafter called "LRP") are manufactured
according to the highest quality standards. LRP guarantees this product to be free
from defects in materials or workmanship for 90 days (non-european countris only)
from the original date of purchase verified by sales receipt. This limited warranty
doesn´t cover defects, which are a result of misuse, improper maintenance, outside
interference or mechanical damage. This applies among other things on:
This applies among other things on:
• Engine disassembly by customer
• Any modification of the engine done by the customer
• Rust inside the engine
• Dust or dirt inside the engine
• Damaged engine due to glow plug failure
• Overheating
• Scratches inside the engine caused by dirt or dust
• Water in fuel
• Wrong break-in procedure
• Damaged piston due to piston stop devices
• Damaged cylinder exhaust port due to piston stop devices
• Breakages at high rpm without engine load
To eliminate all other possibilities or improper handling, first check all other compo-
nents in your model and the trouble shooting guide, if available, before you send in
this product for repair. If products are sent in for repair, which do operate perfectly,
we have to charge a service fee according to our pricelist.
With sending in this product, the customer has to advise LRP if the product should be
repaired in either case. If there is neither a warranty nor guarantee claim, the inspec-
tion of the product and the repairs, if necessary, in either case will be charged with a
fee at the customers expense according to our price list. A proof of purchase inclu-
ding date of purchase needs to be included. Otherwise, no warranty can be granted.
For quick repair- and return service, add your address and detailed description of the
malfunction.
If LRP no longer manufactures a returned defective product and we are unable to
service it, we shall provide you with a product that has at least the same value from
one of the successor series.
The specifications like weight, size and others should be seen as guide values. Due to
ongoing technical improvements, which are done in the interest of the product, LRP
does not take any responsibility for the accuracy of these specs.
LRP-Distributor-Service:
• check www.LRP .cc
MA00266 © LRP electronic GmbH 2016
4.15 HP
33.600 RPM
ENGLISH
LRP electronic GmbH
Hanfwiesenstraße 15
73614 Schorndorf
Deutschland