Auto Track - Marantz professional PMD661 MKIII Guide D'utilisation

High Cut Filter
The treble region of the input audio is cut as the audio is recorded. Set to On to reduce high
frequency noise from the ambient environment.
Setup High Cut in the preset menu.
Silent Skip
The Silent Skip function automatically pauses recording when there is a period of silence and
resumes recording when sound resumes.
Silent Skip menu setting permits adjusting the sound level that defines silence as Off, –60dB,
–54dB, –38dB, –20dB.
Setup the Silent Skip
Manual Track
When the Manual Track (Manual Track incrementing) is on during recording, press the Function
button until "TR" appears on the display, then press the F1 (TR) button to increment the audio
file.
A new audio file is created at that point. The continuity of sound is not guaranteed and depends
on the speed of a card or the audio file size.

Auto Track

With the Auto Track (Automatic Track incrementing) On, a new audio file is begun automatically
at specified intervals of recording time. The Auto Track can be set to increment every 1, 5, 10, 15
or 30 minutes, or every 1, 2, 6, 8, 12 or 24 hours. The Auto Track makes finding a particular point
in a recording easier. For example, if a new audio file begins every minute during playback, the
Auto Track makes finding a particular passage easier because of the relationship between file
numbers and time. During playback, you can select file number 3 to play approximately the 3rd
minute of recording. To go directly to the beginning of the 10th minute, select file number 10, etc.
The continuity of sound is not guaranteed and depends on the speed of a card or the file size.
Setup Auto Track in the preset menu.
Note: New audio file starts automatically when the recorded file size reaches 4GB.
Copy Segment
Copy Segment physically turns your "highlighted" section into a new and separate file, without
destroying the original source file(s).
1. "COPY" is displayed during playback. Press the F1 (Copy) button when the audio reaches
your desired IN-point. "Set as IN?" is displayed.
2. Press the Enter button to store the IN-point. "IN-" will flash on the display to indicate the IN-
point has been stored and playback of the file resumes.
3. Continue to let the PMD661MKIII play to your desired OUT-point, or use the standard
transport controls like the
in the preset menu.
or buttons to span greater time lengths.
13