Usb Mode - Marantz professional PMD661 MKIII Guide D'utilisation

Passcode Input
The passcode, a number between 0000 and 9999 that is set in
inputted when the Menu Lock
When starting to change these settings or play such files, the passcode input screen appears on the
display and the character selected with the cursor flashes. By factory default,
To set a Passcode:
1. From Stop, press the F1 (Menu) button.
2. Press the Pitch+ or Pitch– button to select Preset Menu. Then press the Enter button to accept.
3. Press the Pitch+ or Pitch– button to select Preset 1, 2, 3, or a renamed preset. Then press the
Enter button to accept the selected Preset.
4. Press the Pitch+ or Pitch– button to select Edit and press the Enter button to accept.
5. Press the Pitch+ or Pitch– button to select Passcode and press the
passcode. You can now input a passcode (see below).
To input a Passcode:
1. Press the Pitch+ or Pitch- button to change the character.
The number increases between 0 and 9 each time the Pitch+ button is pressed, and decreases
between 0 and 9 each time the Pitch- button is pressed.
Press the or
2. Press the Enter button with the cursor set at the last character to enter the passcode.
Inputting can be cancelled by pressing the Enter button without entering a Passcode or entering an
incorrect Passcode. The Display will show "Passcode Fail" and return to Stop Mode.
3. Press the F1 (Exit) button. The display will show "Store?". Select Yes and press the
button to store the change.
Note: If you have forgotten the passcode, restoring the PMD661MKII to the factory defaults will
remove Passcode restrictions.

USB Mode

The PMD661MKIII records directly onto SD cards. Recordings can then be transferred to your desktop
or laptop computer by removing the SD card from the PMD661MKIII, or by connecting the
PMD661MKIII to your computer via the USB port. Audio recorded in the popular MP3 compression
format is directly available for intranet or internet file sharing. The SD card in the PMD661MKIII appears
as an external drive on a connected computer.
1. Power up the computer.
2. Insert an SD card.
3. Power up the PMD661MKIII.
4. While stopped, connect the cable to the PMD661MKIII and your computer.
• The SD card in the PMD661MKIII appears as a removable device on your computer.
Notes:
•
USB power activates this function even without the AC adapter or batteries.
•
No buttons other than the Power switch will function.
Caution:
•
Do not remove the SD card during USB Mode. The data and the SD card may be damaged.
•
During recording and playback, do not connect the cable to the PMD661MKIII and your computer.
The PMD661MKIII may turn itself off or stop, by the USB power condition.
setting is On and to play files recorded with encrypted recording.
buttons to move the cursor.
Passcode in the Preset menu, must be
****
is displayed.
or buttons edit the
/Enter
11