Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
12

OPERATION

The appliance can be used both for boiling food and for heating water and other
liquids.
Boiling
1. Place the rack in the cooker.
2. Fill the food into jars and close the jars.
3. Stack the jars on the rack as shown in the illustration.
Note: For smaller glasses, more glasses will fit into the device.
4. Fill the cooker with enough water to cover the highest glass of 3⁄4 with water. Do
not exceed the maximum mark.
5. Put on the lid and turn on the main switch (ON). Please note that a timer must be set
for the appliance to start heating. Depending on the fill level and target temperature,
this can take up to 90 minutes. As soon as the set temperature is reached, the
appliance automatically switches from heating mode to warm-keeping mode.
6. Then set the temperature and time according to the cooking table. The time
indicated there applies from the point at which the target temperature is reached.
The timer does not take into account the lower temperature during the warm-up time
due to the design.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

100335241003352510033526

Table des Matières