Dynaudio Xeo Manuel Du Propriétaire page 20

LEFT 1
MONO 2
RIGHT 3
ROOM
POWER
ON
AC 100V-230V ˜ 50/60Hz
20
Loudspeakers
The active Xeo 3 and Xeo 5 loudspeakers have an integrated amplifier and can be controlled with
the Xeo remote control. The loudspeakers can be switched between stereo and mono mode using a
switch on the rear.
Description of connections and control elements
Left
Mono
Right
1
2
OFF
3
POWER
Cloth cover
The cloth cover has been designed so it does not influence the sound dispersion of the loudspeaker. It
may, however, be removed if needed.
► To do this, pull the cloth cover towards you and off of the housing.
Operating mode
• Left = Switch position for the left loudspeaker in stereo
• Mono = Switch position if only using one loudspeaker
• Right = Switch position for the right loudspeaker in stereo
Room selection
Speakers in different rooms can be controlled separately via the remote control.
Power switch
• ON = The loudspeaker is on. The loudspeaker can be activated and deactivated
via the remote control. If the loudspeaker is activated and there is no signal, it will
switch to standby mode.
• OFF = The loudspeaker is completely off.
Mains socket
To connect the loudspeaker to the mains voltage.
Dynaudio