Connections And Control Elements - Dynaudio Xeo Manuel Du Propriétaire

1 2 3
A
PC/MAC
5V DC
Sound Card
B
500mA
C
R L
Aux In Line In Digital In USB In Id Power
Transmitter
Signal sources such as tuners, receivers, CD players, TVs, streaming clients, network players, MP3
players, or computers are connected to the transmitter. Signals are sent via radio from the transmitter
to the loudspeakers where they are then played back.

Connections and control elements

Aux in Input for cable with stereo jack
Connect devices here that have an output for the stereo jack (3.5 mm).
Line in Input for cable with RCA plug (cinch)
Connect devices here that have an output for the RCA plug.
Note: If a device is connected in parallel at Aux in, only that device will be played
back.
Digital in Input for optical digital cable
Connect devices here that have an optical digital output (Toslink).
USB in Input for USB cable
Connect your computer's USB output here. The transmitter will then work as a sound
card.
ID Transmitter ID
One of three transmitter channels can be selected and operated via the remote
control. To do this, select the appropriate ID (A, B, or C).
Power Connection for power supply unit
Connect the delivered power supply unit here.
Do not use a different power supply unit!
Note: If you connect the transmitter via a USB cable to a computer (that is switched
on), you do not need a power supply unit.
EN
17