Assembling Unit - Generac GC1000S Manuel De L'utilisateur

Assembling Unit

1. See Figure 2-2. Use a 14 mm wrench to remove
the two nuts and lock washers (A) that hold frame
stand (B) onto frame (C).
.
A
Figure 2-2. Assembling the Unit (1 of 2)
2. Remove the frame stand and rotate it 180°.
3. See Figure 2-3. Reinstall frame stand with handle
(D) on the outside using the nuts and lock washers
removed in step 1.
D
Figure 2-3. Assembling the Unit (2 of 2)
Owner's Manual for 10 Ton Kinetic Splitter
C
B
010948
010949
General Information and Setup
7