ETQ TG4000 Manuel D'utilisation page 33

ETQ
EASTERN TOOLS & EQUIPMENT INC
Normal wear:
Engines and generators, like all mechanical devices, need periodic parts service and replacement to perform well. Warranty will not cover
repair when normal use has exhausted the life of a part of an engine.
Improper maintenance:
The life of an engine or your equipment depends upon the conditions under which it operates, and the care it receives. Some applications,
such as tillers, pumps, and rotary movers, are very often used in dusty or dirty conditions, which can cause what appears to be premature,
wear. Such wear, when caused by dirt, dust, spark pug cleaning grit, or other abrasive material that has entered the engine because of
improper maintenance is not covered by warranty.
This warranty cover engine related defective material and/or workmanship only, and not replacement or refund of the
equipment to which the engine may be mounted. Nor des the warranty extend to repairs required because of:
1. Problems caused by parts that are not original eastern tools & equipment, inc., parts.
2. Equipment controls or installations that prevent starting, cause unsatisfactory engine performance, or shorten engine life.
(Contact equipment manufacturer.)
3. Leaking carburetor, clogged fuel pipes, sticking valves, or other damage, caused by using contaminated or stale fuel. (Use
clean, fresh, lead-free gasoline.)
4. Parts which are scored or broken because an engine was operated with insufficient or contaminated lubricating oil, or and
incorrect grad of lubricating oil (check oil level daily or after every 8 hours of operation. Refill when necessary and change at
recommended intervals.) Engine damage may occur if oil level is not properly maintained. Read Operating & Maintenance
Instructions.
5. Repair or adjustment of associated parts or assemblies such as clutches, transmissions, remote controls, etc., which are not
manufactured by Eastern Tools & Equipment, Inc.
6. Damage or wear to parts caused by dirt, which entered the engine because of improper air filter maintenance, re-assembly, or
use of a non-original air filter element or cartridge. Read Operating & Maintenance Instructions.
7. Parts damaged by over-speeding, or overheating caused by grass, debris, or dirt, which plugs or clogs the cooling fins, or
flywheel are, or damaged caused by operating the engine in a confined area without sufficient ventilation.
8. Engine or equipment parts broken by excessive vibration caused by a loosen cutter blades unbalanced blades or loose
unbalanced impellers, improper attachment of equipment to engine crankshaft, over speeding or other abuse in operation.
9. A bent or broken crankshaft, caused by striking a solid object with the cutter blade of a rotary lawn mower, or excessive v-belt
tightness.
10. Routine tune-up or adjustment of the engine.
11. Engine or engine component failure, i.e., combustion chamber, valves, valve seats, valve guides, or burned starter motor
winding, caused by the alternated fuels such as, liquefied petroleum, natural gas, altered gasoline's etc.
Warranty is available only through service dealers, which have been authorized by Eastern Tools & Equipment, Inc., please
contact the place of purchase or Eastern Tools & Equipment, Inc. for a Service Dealer near you.
Tel: (888)908-6200
30
Web Site: easterntools.com