Rowenta Pro Precision Mode D'emploi page 6

ny commercial use, inappropriate
use or failure to comply with the
instructions, the manufacturer ac-
cepts no responsibility and the
guarantee will not apply.
For your safety, this appliance
conforms to the applicable stan-
dards and regulations (Low Vol-
tage, Electomagnetic Compatibility,
Environmental Directives, as appli-
cable...).
Your Pro Precision steam station is
an electrical appliance: it must be
used in normal conditions of use.
It is fitted with 2 safety systems:
- pressure release valve which,
in the event of a malfunction,
releases any excess steam.
- thermal fuse to prevent the
appliance from overheating.
lways plug your Pro Precision
steam station into:
- n electrical installation with
voltage 120V.
Connecting to the wrong voltage
may cause irreparable damage to
the appliance and will invalidate
your guarantee.
- The appliance must not be left
unattended while it is connected to
the outlet.
- The plug must be removed from
the outlet before the water
reservoir is filled with water.
- The appliance must be used and
rested on a stable surface.
- When placing the appliance on its
stand, ensure that the surface on
which the stand is placed is stable.
- The appliance is not to be used if
it has been dropped, if there are
S VE THESE INSTRUCTIONS
visible signs of damage or if it is
leaking.
- If the supply cord is damaged, it
must be
manufacturer, its service agent or
similarly qualified person in order
to avoid a hazard.
- This appliance is not intended for
use by persons
children) with reduced physical,
sensory or mental capabilities, or
lack of experience and knowledge,
unless they have been given
supervision
concerning use of the appliance by
a person responsible for their
safety.
- Children should be supervised to
ensure that they do not play with
the appliance.
- Do not direct steam at people,
animals or iron clothes while they
are being worn.
- "Calc way-System":
wait before rinsing the collector
until the steam station has cooled
down and has been unplugged for
at least 2 hours before unscrewing
the collector.
If you lose or damage the scale
collector, have it replaced by
calling Rowenta
Services.
- Never attempt to unscrew the
scale collector while the appliance
is in use. The strong steam
pressure could results in burns.
Only unscrew the collector when
the appliance is cold (2 hours) or
there is no more pressure in the
boiler.
3
replaced by
(including
or instruction
Consumer
the
lways