Cleaning & Maintenance - Singer SteamLogic Manuel D'instructions

6. Temperature bars will blink when the iron is heating up.
8. Disconnect the Power Cord from electrical outlet.
mineral deposits will release from the soleplate holes,
cleaning out the steam chamber.
12. Gently move the iron back and forth until Water Tank
is empty.
Clean Button.
14. Plug in the Power Cord to electrical outlet and set the
15. When the temperature bars stay on, move the iron gently over a piece of used cloth
to remove any water stains that may have formed on the soleplate.
16. Disconnect the Power Cord from the electrical outlet and position steam iron back
on its heel rest. Wait for iron to completely cool down before storing.
WARNING: Do not put vinegar or other descaling agents in the Water Tank.
WARNING: Keep skin/body away from the hot water and steam.
CLEANING & MAINTENANCE
1. Disconnect the Power Cord from electrical outlet.
2. Use a damp cloth or non-abrasive cleaner to remove deposits from the soleplate.
4. Never use abrasives, vinegar or descaling agents to clean the iron.
HELPFUL IRONING TIPS
2. If you start ironing at a high temperature and then select a lower one, the soleplate
may take more than 2 minutes to cool down. To speed up the cooling process, press
the steam trigger.
3. Test by ironing a small, inconspicuous part of the garment if you are unsure about the
needs time to reach the required heat level, whether it is higher or lower.
5. Delicate fabrics such as silk, wool, velour, etc. are best ironed with an ironing cloth to
prevent shine marks.
Using Your SteamLogic Steam Iron
ENGLISH – 9