18
6.2
LOG AND LOG LED REPLACEMENT
If the log's LED lights become damaged replace with the proper LED light.
EN
6.3
FLAME GLASS REMOVAL
A.
B.
C.
6.4
FLAME BOARD REMOVAL
A.
Remove the 5 screws on the bottom and 4 screws
on top of the fl ame board.
B.
Lift the fl ame board out of the unit.
W415-1299 / B /
06.16.14
Place a hand on the glass to hold it in place while removing the 10 screws on the bottom of the
glass. The glass will fall down to 2 holding tabs.
Tilt the glass forward on the bottom with both hands, lift the glass up and out of the unit.
Place the glass on a soft, non-abrasive surface.