If Something Goes Wrong; If It Still Won't Work; Spare Parts - Indesit G85C Utilisation Et Entretien Et Notice D'installation

If something goes wrong

First, don't panic! There may be nothing wrong at all. Look for your
problem below, then check the things we suggest. More often than
not, this will give you the answer to your problem, and you'll be able
to carry on without having to telephone your Service Office.
If after this you still cannot get your machine to work, follow the
advice given on the next page.
Problem Check these things first
'It won't start' 1. Is the machine plugged in and switched on at the socket?
2. Is the Control set to required programme?
3. Is the door securely closed?
4. Have you pressed the START button?
5. Has the fuse blown? (Try plugging in another appliance to check).
6. Have you used an extension lead? Many are not suitable. Try
plugging the dryer directly into a socket to check.
'It is taking a long
1. Have you forgotten to clean the filter? It should be cleaned after
time to dry'
each load.
2. Does the water container need emptying?
Is the Indicator lamp glowing red/orange?
The bottle should be emptied after every load.
3. Does the Condenser need cleaning? It should be cleaned every
month.
4. Have you selected the correct programme setting for the type of
fabric you are drying?
5. Have the air intake grille or rear vents of the Dryer been
obstructed?
6. Were the clothes 'excessively wet' when they were put in?
7. Was the correct programme selected?
8. Have you overloaded the dryer?
'The Dryer is This is perfectly normal - it means that the Dryer is on 'Crease Care'
tumbling and has reached the end of the drying cycle and the clothes are
occasionally' ready to take out.
'The dryer keeps This is perfectly normal, the dryer is on 'Crease Care' as above.
bleeping' Press the Alarm (Buzzer) button and the bleeping will stop.
Indicator Lamp is See section "The Controls", this indicates a possible fault.
flashing
Any other Have you re-read this instruction book?
problem

If it still won't work...

Contact the Service Office
if something is still wrong with your machine after you've been
through the check-list on the previous page:
1. Switch off and unplug your machine from the mains.
2. Call your nearest Service Office or local importer.
When you contact us we will want to know the following:
1. Your name, address and postcode.
2. Your telephone number.
3. Clear and concise details of the fault.
4. The model number and the serial number of your dryer.
5. The date of purchase enter the date here.
Please make sure you have all these details ready when you call.

Spare parts

Please remember your new appliance is a complex piece of
equipment.
'DIY" repairs or unqualified and untrained service people may put you
in danger, could damage the appliance, and might mean you lose
cover under the Parts Guarantee.
If you do experience a problem with the appliance don't take risks,
call in our Ser vice Engineer. Our Spare Par ts are designed
exclusively to fit your appliance. Do not use them for any other
purpose as you may create a safety hazard.
Disposal of your product
To minimise the risk of injury to children please dispose of your
product safely. The door and lid should be removed and mains cable
cut off flush with the appliance ensuring that the mains plug can no
longer be plugged into a mains socket. The items must then be
disposed of safely.
This appliance conforms to the following EEC Directives.
Low Voltage Equipment
72/23/EEC
93/68/EEC
Electromagnetic Compatibility
89/336/EEC
92/31/EEC
93/68/EEC
9